2024 Nissan Murano Key Fob Guide (US): Types, Batteries, Programming & Costs

The 2024 Nissan Murano (US market) typically uses an Intelligent Key proximity fob that supports push-button start and keyless entry. Most replacements require pairing to the vehicle with professional diagnostic equipment, so programming is usually not a DIY step. Battery replacement is commonly straightforward, but exact battery type can vary by fob version. Before buying any replacement, consumers generally find it’s important to match the fob’s FCC ID/part number and button layout to avoid compatibility issues.

2 Key Types
$250-$550 Dealer Range
$40-$180 (fob only; programming typically adds $80-$200+) Aftermarket Range

Compatible Key Fob Types

The following key types are typically compatible with the 2024 Nissan Murano. Compatibility varies by trim and options.

Nissan Intelligent Key (Proximity Smart Key Fob)

A proximity (smart) key fob used with Nissan’s Intelligent Key system for passive entry and push-button start. The vehicle senses the fob when it’s nearby, allowing door unlock/lock via the handle and starting the engine with the start/stop button (when the fob is present).

Features

  • Proximity keyless entry (request switch on door handle)
  • Push-button start/stop (Intelligent Key required)
  • Remote lock/unlock and panic (button set varies)

Buttons

lockunlockpanicremote start (if equipped)power liftgate (if equipped)

Battery

CR2032 (commonly used; verify by opening fob or checking owner’s manual)

3-5 years (battery life varies with use and temperature) typical lifespan

Dealer OEM $250-$550 (fob + programming; varies by region and trim) Programming included
Aftermarket $40-$180 (fob only; programming usually extra) Programming separate

Programming

🏢 Dealer Required

Programming typically requires a scan tool/diagnostic system capable of Nissan Intelligent Key registration. Many vehicles also require all existing keys present during programming, because adding/replacing a key can overwrite or re-register the full set. Proof of ownership is commonly required by dealers and locksmiths.

⚠️ Common Issues

  • Wrong FCC ID/part number or frequency leading to no-program/limited function
  • Aftermarket/refurbished fobs that are locked, previously registered, or not truly compatible
  • Weak coin-cell battery causing intermittent detection (no start, 'Key ID Incorrect', reduced range)
  • Damage from moisture or drops causing short range or non-responsive buttons

Emergency Insert Key (Mechanical Blade inside the fob)

A hidden mechanical key blade stored inside the Intelligent Key fob. It is intended for emergency door access if the fob battery is dead or the remote functions are not working. On many push-start vehicles, it typically does not start the engine by itself.

Features

  • Manual driver-door unlock when fob battery is dead
  • Backup access when remote functions fail
  • Can be cut to match the vehicle’s lock

Buttons

none (mechanical key blade)

Battery

None

10+ years (physical wear depends on use) typical lifespan

Dealer OEM $20-$80 (cutting only; varies by source) Programming included
Aftermarket $10-$40 (blank + cutting; varies by source) Programming separate

Programming

🏢 Dealer Required

This is a physical key blade that must be cut to match the vehicle. It generally does not replace the need for a programmed Intelligent Key fob for push-button start operation.

⚠️ Common Issues

  • Uncut or incorrectly cut blade won’t turn the door lock
  • Some blanks are the wrong profile for the Murano’s keyway
  • Consumers sometimes misplace the insert key and only discover it during a dead-battery situation

Cost Comparison: Your Options

🏢

Dealership

$250-$550
  • âś“ OEM quality guaranteed
  • âś“ Programming included
  • âś“ Warranty coverage
  • âś— Higher cost
  • âś— May require appointment

Best for: Warranty coverage, guaranteed compatibility

🔧

Locksmith

$150-$350 (where available; may vary by equipment and key availability)
  • âś“ Often same-day service
  • âś“ Mobile options available
  • âś“ Programming included
  • âś“ Often OEM parts
  • â–ł Verify credentials

Best for: Speed, convenience, moderate savings

📦

Aftermarket Online

$40-$180 (fob only; programming typically adds $80-$200+)
  • âś“ Lowest cost option
  • âś“ Wide selection
  • âś— Programming not included
  • âś— Compatibility varies
  • â–ł Check return policy

Best for: DIY-capable owners, budget-conscious

Dealer pricing often bundles OEM fob + programming and may be higher but more consistent for compatibility. Automotive locksmith pricing can be competitive when they support Nissan Intelligent Key registration for this model. Aftermarket/refurbished fobs can reduce the part cost, but consumers generally find the biggest risk is incompatibility or a fob that cannot be reprogrammed; programming and cutting are usually additional.

đź›’ Buyer's Checklist

Before purchasing a replacement key fob for your 2024 Nissan Murano, verify these points:

1 Match the replacement fob to your original by FCC ID/IC (if present), part number, and exact button layout (including liftgate/remote start if equipped).
2 Confirm the listing explicitly states the fob is new/virgin or properly refurbished and eligible for reprogramming (some used fobs cannot be re-registered).
3 Ask in advance whether programming will require all existing keys to be present, and whether lost keys can be erased from the vehicle memory.
4 Verify the return policy before purchasing—many sellers won’t accept returns once a fob has been attempted/registered.
5 Budget for cutting the emergency insert key (if needed) and for programming labor, which is often separate from the fob price.

⚠️ Common Mistakes to Avoid

âś—

Buying a fob based only on the vehicle year/model without matching FCC ID/part number and button configuration.

âś—

Assuming the fob can be programmed at home—most Intelligent Key systems require professional tools and authorization steps.

âś—

Replacing the battery but installing it upside down or bending the contacts, leading to intermittent operation.

Related Model Years

Key fob compatibility often spans multiple model years. These years typically share similar key systems:

2022 2023 2024

Frequently Asked Questions

What battery does a 2024 Nissan Murano key fob use?

Many 2024 Murano Intelligent Key fobs commonly use a CR2032 coin-cell battery, but versions can differ. The most reliable approach is to open the fob and read the battery marking or check the owner’s manual for your exact fob.

Can I program a 2024 Nissan Murano key fob myself?

In most cases, no. Murano Intelligent Key fobs typically require dealer-level or automotive-locksmith diagnostic equipment to register the key to the vehicle, and some programming procedures require all existing keys to be present.

If my key fob battery is dead, can I still get into and start the Murano?

You can typically unlock the driver door using the emergency insert key stored inside the fob. Starting the vehicle usually still requires the Intelligent Key fob to be present; many push-start vehicles have an emergency start procedure that can work with a low/dead fob battery (consult the owner’s manual for the exact steps for your Murano).

Need Help With a Specific Situation?

🚨 Lost All Keys What to do when you've lost your only key ➕ Get a Spare Add a backup key before emergencies 🔋 Dead Battery Replace your key fob battery ⚖️ Compare Options Full comparison of all options

Related Nissan Models

Nissan Rogue Nissan Pathfinder

Need a Detailed Compatibility Report?

Get a comprehensive PDF report with exact part numbers, FCC IDs, and verified compatibility for your 2024 Nissan Murano.

Get Compatibility Report - $9

Instant PDF download • Money-back guarantee

Last updated: 2026-01-04